SB Primer
Quick-drying, solvent-based primer for use on wooden floors in commercial, residential or sports areas.
Excellent for wooden floors where water-based primers cannot be used due to poor adhesion, for example exotic and oily timbers. The primer is also recommended for renovating dark coloured, patterned floors.
SB Primer gives the floor more depth of colour and should only be used directly on bare wood.
Protective coats with one of Junckers' water-based or oil-based floor lacquers have to be applied after priming.
For professional use only.
Available in: 5 litre.
How to apply HP BasePrime
Untreated/sanded floors:
Ensure that the surface is absolutely clean, dry and free from dust, wax, grease, polish etc. Sand the surface to remove dirt and irregularities. The final sanding should be carried out by using sandpaper grit 120-150. Vacuum thoroughly and wipe off with a cloth well wrung in clean water.
Prime with one coat of SB Primer and leave to dry.
Sand with sandpaper grit 150-180 along the fibres of the wood.
Vacuum sanding dust and wipe off with a cloth well wrung in clean water.
Apply 2 finishing coats of top-lacquer according to one of Junckers' system recommendations.
Previously sealed floors:
Machine sand the floor by using sandpaper grit 24-36 to strip old coats.
Then remove abrasion marks with grit 60-80.
Proceed as described under “Untreated/sanded floors”.
We’re here to help
If you want to get the most out of your Hardwood Floor, talk to the experts. Connect with the Hardwood Technology team today.